 |
 |
 |
 |
| 53 Plyarc® Arc and Fireproofing Tape
Now
available in fiber optic orange. |
 |
77 Plyglas® Pressure Sensitive Glass Cloth Tape
A 7-mil (0,18mm) woven glass fabric tape with a thermosetting rubber-based pressure sensitive adhesive used for insulating and protecting high temperature (130°C) connections, such as motor leads and transformer windings. 77 Plyglas has high tensile strength for splice reinforcement and provides excellent tear and abrasion resistance. Use 77 Plyglas to hold down 53 Plyarc and Fireproofing Tape. Comm Spec. 7611, ASTM-D-2754,
MIL-I-15126F/GFT.
61 and 61A Varnished Dacron®-Glass Tape
61 and 61A tapes are composed of Dacron® and glass woven fabric, impregnated with a high quality, cured, polyester electrical insulating varnish, providing excellent electrical and mechanical protection. The tapes are intended for use up to 155°C and have excellent flexibility and elongation. They conform tightly to irregular shapes and surfaces. 61 is a 7 mil (0,18 mm) tape without adhesive and 61A is an 8 mil (0,20 mm) tape with a thermo acrylic adhesive.
44 Neoprene Jacketing Tape
A 30-mil (0,76mm) self-amalgamating neoprene tape specially formulated for permanent protection of cables exposed to oil, grease and other hydrocarbons. 44 Neoprene is chemical, weather and flame resistant. Use for corrosion protection on lead splicing sleeves.
55C Adhesive
A fast drying rubber-based cement that is used as a bond between cable jacket and jacketing tapes to provide a waterproof splice. Also used for bonding between cable insulation and insulating materials. 55C is compatible with all types of polymeric cable insulations an jackets.
Cohesive Rubber Tape (CR)
A 50-mil (1,3mm) tape with a soft, uncured layer bonded to a cured, abrasion resistant layer. Unique separator allows controlled removal at the user's discretion. An airtight, waterproof, gas-tight seal is formed when the uncured layer is bonded to itself. This meets the Industry Standard for temporary splice coverings on communication and control cables. Maintains gas pressure in pressurized cable. Meets industry specification 7144.
Double Rubber Tape (DR)
A 45-mil (1,1mm) non-adhesive, self-bonding communications tape used for critical sealing and re-jacketing. One layer of uncured compound permanently fused to an abrasion resistant layer of cured rubber. Easy-tear separator. Controlled unwind. Full or half-lapped, a strong bond develops between both plies to maintain gas pressure in pressurized cables. Communications Industry DR specifications TL-192 and 6863.
Rubber Tie-Cord
A tough rubber compound extruded to 1/8" (3,2mm) diameter and cured to provide high breaking strength and knot stability. Tie-Cord is primarily used to secure CR Tape when making temporary splices and repairs and communications cables. Breaking strength of 27lbs (12kg), Elongation of 450%. ASTM-D-1000.
| Plymark® Wire Markers Plymark series of wire and matching terminal marker books, self-laminating write-on wire and cable marker books, dispensers and refill rolls. Click here to browse the complete set of our Specification Sheets. To view specifications of specific products click the link with the product description. You must have the free Adobe Acrobat Reader to view the files. If you do not have it installed, click the button below.
|
 |
